Number system Arithmetic – Addition & Subtraction
The most common Number system arithmetic operations are addition, subtraction, multiplication, and division. we all are familiar with these arithmetic operations on decimal numbers. the same operations can be performed on binary, octal, and hexadecimal numbers.
Binary Arithmetic
Binary arithmetic is much simpler than decimal arithmetic because here only two digits, 0 and 1 are involved.
Binary addition
For binary addition, we have to remember some rules that are given in the below table.
Augend | Addend | Sum | Carry |
---|---|---|---|
0 | 0 | 0 | 0 |
0 | 1 | 1 | 0 |
1 | 0 | 1 | 0 |
1 | 1 | 0 | 1 |
Example of binary addition
Add the following binary numbers.
1011 and 1100
1 0 1 1
(+) 1 1 0 0
_____________
Carry(1) 0 1 1 1
So the addition of both numbers 1011 and 1100 is 10111. here that last number 1 is th carry.
Binary Subtraction
For binary subtraction, we also have some rules that are given in the below table.
Minuend | Subtrahend | Difference | Borrow |
---|---|---|---|
0 | 0 | 0 | |
0 | 1 | 1 | 1 |
1 | 0 | 1 | 0 |
1 | 1 | 0 | 0 |
Example of binary subtraction
Subtract the following binary numbers.
1101 and 0011
1 1 0 1
(-) 0 0 1 1
________________
1 0 1 0
When 1 is subtracted from 0, there is a borrow from the adjacent bit.
2’s complement Method
The 2’s complement is used to represent the negative of a binary number. 2’s complement of any binary number can be found by following the steps given.
- Invert all bits
- Add 1 to the inverted number
The obtained number will be negative to the original binary number. the 2’s complement method can be used to subtract the numbers.
Step-1 Write the minute.
Step-2 Find the 2’s complement of subtrahend.
Step-3 Add these two numbers.
Step-4 If carry is there then discard the carry and the remaining is the required result.
Step-5 If carry is not there, take 2’s complement of the result and place a negative sign to MSB that is the reset and is negative.
Example of binary subtraction using 2’s complement
Subtract (52)10 from (92)10 by using 2’s complement method. remember it is the base 10 number.
(52)10 = (0110100)2
(92)10 = (1011100)2
2’s complement of (52)10 = (1001011 + 1)2
= (1001100)2
Now
(1)(1)(1)
Minuend = 1 0 1 1 1 0 0
2’s complement of (52)10 = 1 0 0 1 1 0 0
________________________
[Discard the carry (1)] 0 1 0 1 0 0 0
The result is (0101000)2 or (40)10
Octal Arithmetic
Octal arithmetic rules are similar to decimal or binary arithmetic. arithmetic operations for octal numbers can be performed by converting the octal number to binary numbers and then using the rules of binary arithmetic.
Example of octal addition
Add the numbers (23)8 and (56)8.
(23)8 = 0 1 0 0 1 1
(56)8 = (+) 1 0 1 1 1 0
_______________________
(1) 0 0 0 0 0 1
Carry
Thus the result is (1000 001)2 = (101)8
Hexadecimal Arithmetic
The rules for arithmetic operations with hexadecimal numbers are similar to the rules for decimal, octal and binary systems.
The information can be handled only in binary form in a digital circuit and it is easier to enter the information using a hexadecimal number system. since arithmetic operations are performed by the digital circuits binary numbers, therefore hexadecimal numbers are to be first converted into the binary numbers.
Example of hexadecimal addition
Add the two numbers (7F)16 and (32)16
(1)(1)(1)(1)(1)(1)
(7F)16 = (0 1 1 1 1 1 1 1)2
(32)16 = + (0 0 1 1 0 0 1 0)2
______________________________
1 0 1 1 0 0 0 1
So the result is (1011 0001)2 or (B1)16